Super Sheds

DIY Shed Building Tips — The Family Handyman Super Sheds

This Guide Will Help You Save Money and Time on Building Your Shed. How to Make a Shed.  Super Sheds

A Man Showing with Confidence That He built a Shed and that you also can build a shed with the instructions from A to Z.

DIY Shed Building Ideas

This guide contains essential information about floors, roofs, windows, and doors. Plus, it explains how to save money and time on your shed. 

  • Affiliate Disclosure
  • Privacy Policy
  • Easy Shed Foundation

    When building a shed foundation you don’t need to place it on large footings. In areas that have well-drained soil, a pair of shallow trenches filled in gravel can be used. They are then topped off with 6x6s. You can now level and square your 6x6s and then attach the joists.    Super Sheds

    Easy Shed Foundation

    Pouring concrete can be more difficult if your shed site is sloped. You will need to make strong forms and add concrete on the side that’s downhill. You can build your shed floor as a deck using footings and posts. A plywood frame is also an option. You can cover the area between the shed’s floor and ground with a skirt if you do not like it.

    Building on Posts Is a Good Option for Sloped Sites

    It doesn’t make sense to skimp on this step, as it is completely free. is a free online resource that can help you avoid costly mistakes when building sheds. You may also save yourself the pain of a tragic accident by calling 811 before digging to locate your underground utilities.

    A Concrete Slab Is the Best Choice for a Shed Floor

    Concrete is the best choice for shed floors that are strong and long-lasting. Surprisingly the cost of concrete slabs can be poured yourself for a fraction of the cost of wood platforms. Learn how to pour your concrete shed floor.

    Make Shed Floors & Walls Perfect

    Do not let yourself get distracted by the look of a sloppy shed floor or wall. A sloppy start can haunt you throughout the entire project. This includes doors, windows, and trim as well as roofing. Measure diagonally from the corners of each form board to make a concrete slab. Adjust the forms so that the diagonal measurements match. For a wooden platform floor, do the same. Before you apply sheet siding to the walls, make sure you measure the length of the wall diagonally before nailing on the siding.

    Building Shed Roof Trusses

    It doesn’t matter if you buy trusses from the lumberyard or build them yourself, trusses make it easier to construct a roof than framing one roof rafter at a time. You will need one truss for every 2ft when building a shed roof. The cost of building your shed roof will only be half the amount. Join the framing to site-built Trusses using plywood gussets that are glued and screwed at the joints.

    First, Install the Siding

    Although it’s unlikely that this will be possible all the time, if you have sufficient helpers to lift and support the wall, siding walls can make your life easier. Before nailing on siding, make sure you straighten and square your wall. It is much easier to accomplish this on a woodshed floor, as you can attach the plates to the ground to keep the wall square and straight while installing the siding.

    You Can Keep Shed Framing Straight

    Good carpenters are always careful to ensure that all framing is straight. All you need is a string. Start at the floor and stretch the string across the concrete forms, rim joists, or beams. Adjustments can be made to correct any deviations. Next, stretch a string along the concrete forms or rim joists. Finally, adjust the string to straighten any deviations.

    To build a storage shed, you need to extend the line along a piece of scrap wood at each end. This will create a gap between the line to the section that needs to be straightened. For example, attach small pieces of plywood measuring 1/2 into a wall. Attach plywood to each end of the top plate. Then stretch a very tight line over plywood. Use a third scrap to measure the distance between your line and the lumber. Adjust the top plate with braces, or any other means necessary to ensure it fits perfectly. Your top plate should now be straight.

    Straight Studs

    All studs should be perfectly straight in a perfect world. However, they’re not. Make sure you choose the right ones for corners, windows, and door openings. Take a look at the lengths of all the studs, and then set aside those that are not straight. You can also take out studs that have a crooked appearance. These can be used as blocking or cripples. There may be other uses later.

    Add Some Trim to a Plain Sheath

    Installing 4×8-foot sheets of siding on shed walls is an economical and fast way to do it. The result could look quite plain. A wide-cornered shed can be transformed into something spectacular by adding a window at the top and base, as well as a door casing and wide corner boards.

    Building Trusses to a Shed: Trusses on the Shed Floor

    The shed floor is the best place to build your roof trusses. You must do this before you start building the walls. To outline the truss pieces, you can use chalk lines to draw them on your shed floor. Next, use these chalk lines to guide you in cutting the truss pattern and assembling your trusses.

    To Protect Shed Siding, Add Overhangs

    You might consider adding an overhang to your shed’s ends. While they are more labor-intensive and may require additional material, overhangs offer some protection against rain and snow. This means that you will need to paint and maintain your shed less. Overhangs look great and allow you to attach decorative brackets.

    Create Economical Sandwich Doors

    Frame-and-panel doors can be expensive, particularly if you are looking for a particular style. You can achieve the exact same effect by laminating two sheets of 3/4-inch thick boards together.

    To increase strength, you should build your front and back layers so that the corners overlap. To accommodate the inset panels, you can make the front layers a bit wider so that the panels have a lip to rest on. For the panels use plywood or tongue and groove boards. Attach them to the panel with stoppers at the back. Although you can put together the frames using pocket screws, it is not required. To hide two layers, sand or plane the edges after the glue has dried.

    Saving Money With Barn Sash Windows

    These barn sash windows can be used to make sheds more useful. You order the sash, which is basically the glass part that moves with your frame. You can make a window that is affordable and attractive by adding a couple of hinges and holding-open hardware. You will need to make a frame separately and attach staple screening.

    Get Cut-to-length Steel Roof Panels

    A circular saw with a carbide blade and a cutter can be used to cut roofing panels from steel. However, it will save you time and effort if the panels are ordered at the correct length. You’ll also have more color options if you buy roofing panels off the shelf. It can take several weeks to receive your roofing. Make sure that the overhangs you choose are appropriate in order for the panels to slightly overhang your fascia.

    Get Shed Siding at a Discount

    Natural wood siding doesn’t have to be used if you intend on painting your shed. OSB siding sheets can be purchased at a fraction of the price of plywood and will last much longer. One brand is LP SmartSide. There are many options for panels. You can choose from plain or grooved and stucco-like. Check with your lumberyard for the latest information.

    Sliding Shed Door Hardware: Closet Door Hardware

    It’s not worth it to buy galvanized hardware made for farms for your shed. Buy heavy-duty closet door hardware instead. Although it is not intended for outdoor use it will last well if it has an overhang. It’s easy to change the whole hanger mechanism if the bearings become corroded. Major Hardware stores have 111-track and 1025-ball bearing hangers.

    Shed Roof Construction: Rent Scaffolding

    It is much more hazardous to work from ladders than from scaffolding. It is also time-consuming to move ladders around. Consider renting scaffolding that has wheels when you reach the roof. It will be a lot easier to use a sturdy platform for your work and set up tools. A 5-foot-tall scaffold section with three planks, wheels, and three planks can be rented for $110 per week.

    For a Personal Touch, Add Brackets

    There is nothing that can dress up a shed bracket like this. These are the perfect low-effort feature that will make a big impact. They can also be used to support your gable end overhang. You can make brackets using 4x4s, or laminate 2-by boards depending on your design. To get the right details, draw a detailed drawing. Next, attach the brackets to your shed. Attach the brackets to the shed’s underside. Next, notch the fascia boards to cover them.

    Paint the Wood Trim With a Painted Finish

    Avoid real wood for painted trim. You can find other options that will hold paint longer and not rot. These are some of the products you should consider.

    You can also build a shed yourself or hire a contractor to do it. An alternative is to buy a kit that has been pre-built. You can build your own resin, plastic or metal shed using prefabricated parts and the manufacturer’s instructions. For beginners or those looking for a woodshed option, kits are a great choice. It takes less time to put together than building one from scratch. Shed kits are not customizable because they come prefabricated.

    A Picture of a Shed being built and how it not that difficult for you to Build a Shed yourself.

    Do you think it is cheaper to make your shed yourself?

    It is cheaper to buy a shed pre-built than build it yourself. This is assuming you own all of the necessary tools to construct the shed. It won’t usually take any special tools to construct the shed.

    It is possible to construct a shed yourself?

    Although it can seem daunting, building your shed is a rewarding endeavor. You can store your equipment and tools in a storage shed or garden shed. You can also use a shed to store your tools and equipment for projects, which won’t take up too much space in the garage.

    Which is the most cost-effective way to make a shed?

    Skids: The cheapest method to support your shed is using skids. You can save hundreds or even thousands of dollars by using pressure-treated 4x4s as subfloor support.

    Do you think it is cheaper to make your shed yourself?

    It is cheaper to buy a shed pre-built than build it yourself. This is assuming you own all of the necessary tools to construct the shed. It won’t usually take any special tools to construct the shed.

    Which is the most cost-effective way to make a shed?

    Skids: The cheapest method to support your shed is using skids. You can save hundreds or even thousands of dollars by using pressure-treated 4x4s as subfloor support.